Differential Pressure Transmitter

Product Description

Piezoresistive Differential Pressure Transmitter uses integrated all-welded differential pressure measuring elements. Silicone oil is filled between the chip and the two corrugated diaphragms. This product utilizes the piezoresistive effect of semiconductor silicon materials. To achieve the conversion of differential pressure and electrical signals. The signal output from the Wheatstone bridge on the sensitive chip has a good linear relationship with the differential pressure. Therefore, accurate measurement of the measured differential pressure can be achieved. It is suitable for differential pressure measurement of various gases and liquids in general industrial applications

Standard Features

Pressure Range: 0~10kPa…3.5MPa differential pressure
Static pressure: Max. Static pressure 20MPa
Output Signal: 0.5~4.5V Ratio / 0~10V Voltage / 0~5V Voltage / 4~20mA
Power supply (U+): 5VDC / 12~30VDC / 10VDC~30VDC
Output Load: ≥10KΩ / ≤(U+ -10)/0.023Ω
Over Voltage: 16VDC / 30VDC
Reverse Voltage: -16VDC / -30VDC
Accuracy: Default: ±0.5% F.S., Option:±0.25% F.S.
Sensor’s Temperature: -40℃~85℃
Compensated Temperature: 0℃~50℃
Storage Temperature: -40℃~105℃
Long-term Stability: ±0.25%FS/year
Settling Time: (10%~90%)≤10ms
Overload Pressure: ≥150%F.S
Burst Pressure: ≥200%F.S
Pressure Connection: G1/4(female), G1/4, G1/2(female), G1/2,NPT1/4(female), NPT1/4
Electrical Connection: DIN43650A,Cable outlet, GX12 connector, Packard, M12x1
Seal Materials for Wetted Part: Default: NBR, Option: FKM
Housing Material: 304SS
Wetted part: 316SS
Insulation Resistance: ≥100MΩ@100VDC
Vibration Resistance: 10g,5~2000Hz
Shock Resistance: 20g, 11ms half sine
Protection: IP65

Description

Differential Pressure Transmitter

Product Description
Piezoresistive Differential Pressure Transmitter uses integrated all-welded differential pressure measuring elements. Silicone oil is filled between the chip and the two corrugated diaphragms. This product utilizes the piezoresistive effect of semiconductor silicon materials. To achieve the conversion of differential pressure and electrical signals. The signal output from the Wheatstone bridge on the sensitive chip has a good linear relationship with the differential pressure. Therefore, accurate measurement of the measured differential pressure can be achieved. It is suitable for differential pressure measurement of various gases and liquids in general industrial applications

Features
● Diffusion silicon-filled oil core with stainless steel 316L isolation diaphragm
● Stainless steel structure, andMax. static pressure up to 20MPa
● Temperature compensation and aging screening
● Full solid insulation, high stability, reliability and accuracy
● Compact size
● Liquid, gas and other media differential pressure measurement

Specifications

Pressure Range: 0~10kPa…3.5MPa differential pressure
Static pressure: Max. Static pressure 20MPa
Output Signal: 0.5~4.5V Ratio / 0~10V Voltage / 0~5V Voltage / 4~20mA
Power supply (U+): 5VDC / 12~30VDC / 10VDC~30VDC
Output Load: ≥10KΩ / ≤(U+ -10)/0.023Ω
Over Voltage: 16VDC / 30VDC
Reverse Voltage: -16VDC / -30VDC
Accuracy: Default: ±0.5% F.S., Option:±0.25% F.S.
Sensor’s Temperature: -40℃~85℃
Compensated Temperature: 0℃~50℃
Storage Temperature: -40℃~105℃
Long-term Stability: ±0.25%FS/year
Settling Time: (10%~90%)≤10ms
Overload Pressure: ≥150%F.S
Burst Pressure: ≥200%F.S
Pressure Connection: G1/4(female), G1/4, G1/2(female), G1/2,NPT1/4(female), NPT1/4
Electrical Connection: DIN43650A,Cable outlet, GX12 connector, Packard, M12x1
Seal Materials for Wetted Part: Default: NBR, Option: FKM
Housing Material: 304SS
Wetted part: 316SS
Insulation Resistance: ≥100MΩ@100VDC
Vibration Resistance: 10g,5~2000Hz
Shock Resistance: 20g, 11ms half sine
Protection: IP65

Check out our Pressure Transmitters

Follow us on Pinterest